Dodge Shield Decal
Code: DGDTSF.003
The Dodge Shield Decal puts one of the most iconic badges in American automotive history exactly where you want it. Bold, precise, and instantly recognisable — the Shield speaks for itself. Stick it on the rear windscreen, the toolbox, a helmet, or anywhere else your build deserves a mark of distinction.
Product Details
- Classic embroidered Dodge Shield logo design
- High quality outdoor-grade vinyl with protective lamination
- UV and weather resistant — built to last outdoors
- Measures 150mm wide x 156mm tall
- Suitable for rear windscreens, panels, toolboxes, helmets, and more
Application Instructions
For best results, follow these steps:
- Clean the surface — wipe the area thoroughly with isopropyl alcohol or a lint-free cloth to remove dust, grease, and moisture. Allow to dry completely.
- Position the decal — peel back a small section of the backing paper and align the decal where you want it. Use masking tape to hold it in place if needed.
- Apply gradually — slowly peel away the backing paper while pressing the decal firmly onto the surface with a squeegee, credit card, or your fingers. Work from the centre outward to avoid air bubbles.
- Remove the transfer tape — once the decal is fully applied, carefully peel back the clear transfer tape at a low angle. If any part of the decal lifts, press it back down and try again.
- Smooth and finish — run your finger or a squeegee over the decal one final time to ensure full adhesion across all edges.
Tips: Apply in mild temperatures (15–25°C) for best adhesion. Avoid applying in direct sunlight or on very cold surfaces. Do not apply to freshly painted surfaces — allow new paint to cure for at least 30 days.
The Shield. Wherever you put it, it belongs.
